# Communicate with Micrologix 1400 **URL:** \ **Category:** General Discussion\ **Created:** [September 11, 2013, 3:20pm UTC](https://forum.inductiveautomation.com/t/communicate-with-micrologix-1400/7243 "2013-09-11T15:20:56Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![andrea.minu](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrea.minu/32/3326_2.png) [@andrea.minu](https://forum.inductiveautomation.com/u/andrea.minu)\ **Post date:** [September 11, 2013, 3:20pm UTC](https://forum.inductiveautomation.com/t/communicate-with-micrologix-1400/7243/1 "2013-09-11T15:20:56Z")
Hi to Everybody, I should communicate with ignition with a AB Micrologix 1400 using the its standard ethernet port on the PLC. When I define the device on Ignition, there is a parameter called “connection path”, what I must put inside this form for communicate with the Micrologix 1400. Also, the driver supports the browsing of the tags? Any suggestion is appreciated Thank you very much Andrea ---
**Author:** ![Dravik](https://avatars.discourse-cdn.com/v4/letter/d/e274bd/32.png) [@Dravik](https://forum.inductiveautomation.com/u/Dravik)\ **Post date:** [September 11, 2013, 4:18pm UTC](https://forum.inductiveautomation.com/t/communicate-with-micrologix-1400/7243/2 "2013-09-11T16:18:45Z")
You can leave the connection path blank for the 1400s. And yes you can browse the data files. ---
**Author:** ![andrea.minu](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrea.minu/32/3326_2.png) [@andrea.minu](https://forum.inductiveautomation.com/u/andrea.minu)\ **Post date:** [September 11, 2013, 7:29pm UTC](https://forum.inductiveautomation.com/t/communicate-with-micrologix-1400/7243/3 "2013-09-11T19:29:16Z")
Hi I’ll try your suggestion Thank you very much 😉 Andrea