# CompactLogix stuck on Browse Pending **URL:** \ **Category:** Ignition\ **Created:** [April 1, 2011, 4:26pm UTC](https://forum.inductiveautomation.com/t/compactlogix-stuck-on-browse-pending/2832 "2011-04-01T16:26:39Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![kjwilde](https://avatars.discourse-cdn.com/v4/letter/k/0ea827/32.png) [@kjwilde](https://forum.inductiveautomation.com/u/kjwilde)\ **Post date:** [April 1, 2011, 4:26pm UTC](https://forum.inductiveautomation.com/t/compactlogix-stuck-on-browse-pending/2832/1 "2011-04-01T16:26:39Z")
I had a PLC (CompactLogix) go offline for a while. When it came back Ignition was not able to connect. Here are some reoccuring error from the console: -Unknown RequestId: 345571 -Reaper found timed-out operation: PublishRequest RequestId=460635 RequestHandle=460416 -Reaper found timed-out operation: PublishRequest RequestId=460634 RequestHandle=460415 -Reaper found timed-out operation: PublishRequest RequestId=460636 RequestHandle=460417 -Unknown RequestId: 345570 In the Configuration section, under Devices, that device always says “Browse Pending”. I am currently running Ignition version 7.2.4. I can ping the PLC as well as go online with RsLogix. Any ideas? ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [April 1, 2011, 4:39pm UTC](https://forum.inductiveautomation.com/t/compactlogix-stuck-on-browse-pending/2832/2 "2011-04-01T16:39:23Z")
Those messages aren’t related to the device not reconnecting, but: If the system is still in that state and you can call into support so we can look at it that would be best. Otherwise, Does clicking [refresh browse] and waiting for it to finish work? If you edit, make no changes, and save (forces a reconnect), does that work?