# Component Security Setting Does not Show up! **URL:** \ **Category:** Ignition\ **Created:** [May 22, 2025, 9:36pm UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601 "2025-05-22T21:36:07Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![Saed\_Alhabbashi](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Saed\_Alhabbashi](https://forum.inductiveautomation.com/u/Saed_Alhabbashi)\ **Post date:** [May 22, 2025, 9:36pm UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/1 "2025-05-22T21:36:07Z")
I am trying to assign security to a button! I selected the button and right click and choose security, but nothing shows up to configure it . I have tried other ways. For example, select the component, then choose from menu show security. Also, I have tried the four dots " Panel chooser" (on the left down corner) and select and tick security setting, still does not work?? ---
**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\ **Post date:** [May 23, 2025, 3:28am UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/2 "2025-05-23T03:28:17Z")
Try this one > [@Component Security - Security Settings won't open](https://forum.inductiveautomation.com/t/component-security-security-settings-wont-open/63692/5): > > I had the same issue. I click the panel chooser, reset panels, click again on the panel chooser, security settings and it shows up ---
**Author:** ![josephpallan](https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/32.png) [@josephpallan](https://forum.inductiveautomation.com/u/josephpallan)\ **Post date:** [May 23, 2025, 4:45am UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/3 "2025-05-23T04:45:14Z")
You could also try resetting the panels: Navigate to the upper menu of Designer and select View \> Reset Panels ---
**Author:** ![Saed\_Alhabbashi](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Saed\_Alhabbashi](https://forum.inductiveautomation.com/u/Saed_Alhabbashi)\ **Post date:** [May 24, 2025, 10:38am UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/4 "2025-05-24T10:38:10Z")
Thanks. I already tried and it did not work ---
**Author:** ![Saed\_Alhabbashi](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Saed\_Alhabbashi](https://forum.inductiveautomation.com/u/Saed_Alhabbashi)\ **Post date:** [May 24, 2025, 10:47am UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/5 "2025-05-24T10:47:22Z")
This [Solved the problem](https://forum.inductiveautomation.com/t/component-security-security-settings-wont-open/63692/10) I do not know how to delete the folder !! ---
**Author:** ![andrew.budaiev](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/andrew.budaiev/32/72921_2.png) [@andrew.budaiev](https://forum.inductiveautomation.com/u/andrew.budaiev)\ **Post date:** [May 24, 2025, 11:40am UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/6 "2025-05-24T11:40:44Z")
Cache folder is located in your user directory. `C:\Users\\.ignition` if you're using Windows. To clear the cache you delete `.ignition` folder and it will be created again upon your next launch. ---
**Author:** ![Saed\_Alhabbashi](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Saed\_Alhabbashi](https://forum.inductiveautomation.com/u/Saed_Alhabbashi)\ **Post date:** [May 24, 2025, 12:02pm UTC](https://forum.inductiveautomation.com/t/component-security-setting-does-not-show-up/106601/7 "2025-05-24T12:02:24Z")
Thank you very much. It shows up now following your instruction. However, the Exempt role does nit show the roles that are set up