# Component user access

**URL:** <https://forum.inductiveautomation.com/t/component-user-access/26333>\
**Category:** Ignition\
**Created:** [July 6, 2019, 10:21pm UTC](https://forum.inductiveautomation.com/t/component-user-access/26333 "2019-07-06T22:21:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![damean.thomas](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/damean.thomas/32/11367_2.png) [@damean.thomas](https://forum.inductiveautomation.com/u/damean.thomas)\
**Post date:** [July 6, 2019, 10:21pm UTC](https://forum.inductiveautomation.com/t/component-user-access/26333/1 "2019-07-06T22:21:30Z")

</div>

Is there a way allow a button to be pressed after a 4 digit pin code is entered. I have a material transfer which is controlled by a button. I would like for a number keypad to pop up when the button is pressed so that a 4 digit pin assigned to different users must be entered before the action can be performed.Is this possible in ignition. Trying to monitor usage without the full login/ switch user scenario.

---

<div class="post-metadata">

**Author:** ![zxcslo](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/zxcslo/32/61610_2.png) [@zxcslo](https://forum.inductiveautomation.com/u/zxcslo)\
**Post date:** [July 7, 2019, 5:08am UTC](https://forum.inductiveautomation.com/t/component-user-access/26333/2 "2019-07-07T05:08:29Z")

</div>

[https://docs.inductiveautomation.com/display/DOC79/system.gui.showNumericKeypad](https://docs.inductiveautomation.com/display/DOC79/system.gui.showNumericKeypad)