# Configure Gateway Home Page - Project Launch Options

**URL:** <https://forum.inductiveautomation.com/t/configure-gateway-home-page-project-launch-options/2667>\
**Category:** Ignition\
**Created:** [February 21, 2011, 3:17am UTC](https://forum.inductiveautomation.com/t/configure-gateway-home-page-project-launch-options/2667 "2011-02-21T03:17:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MickeyBob](https://avatars.discourse-cdn.com/v4/letter/m/e19adc/32.png) [@MickeyBob](https://forum.inductiveautomation.com/u/MickeyBob)\
**Post date:** [February 21, 2011, 3:17am UTC](https://forum.inductiveautomation.com/t/configure-gateway-home-page-project-launch-options/2667/1 "2011-02-21T03:17:08Z")

</div>

I apologize if the answer to this question is obvious but how do I configure a project so that the gateway gives me the option to start a it full screen, windowed, and/or as an applet?

I know how to do it with FPMI but can’t figure out how with Ignition.

---

<div class="post-metadata">

**Author:** ![dep05d](https://avatars.discourse-cdn.com/v4/letter/d/e495f1/32.png) [@dep05d](https://forum.inductiveautomation.com/u/dep05d)\
**Post date:** [February 21, 2011, 3:48am UTC](https://forum.inductiveautomation.com/t/configure-gateway-home-page-project-launch-options/2667/2 "2011-02-21T03:48:53Z")

</div>

Open up the project in the designer, click on the “Project” menu, select “Properties”, and under “Client” - “Launching” you will see check boxes for each launch option. You can also select the default launch mode.

Dan

---

<div class="post-metadata">

**Author:** ![MickeyBob](https://avatars.discourse-cdn.com/v4/letter/m/e19adc/32.png) [@MickeyBob](https://forum.inductiveautomation.com/u/MickeyBob)\
**Post date:** [February 21, 2011, 4:38pm UTC](https://forum.inductiveautomation.com/t/configure-gateway-home-page-project-launch-options/2667/3 "2011-02-21T16:38:30Z")

</div>

Thanks. I knew it would be simple.