# Configure Project fault

**URL:** <https://forum.inductiveautomation.com/t/configure-project-fault/4573>\
**Category:** Ignition\
**Created:** [June 4, 2012, 11:52pm UTC](https://forum.inductiveautomation.com/t/configure-project-fault/4573 "2012-06-04T23:52:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hazey](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@hazey](https://forum.inductiveautomation.com/u/hazey)\
**Post date:** [June 4, 2012, 11:52pm UTC](https://forum.inductiveautomation.com/t/configure-project-fault/4573/1 "2012-06-04T23:52:10Z")

</div>

Guys I had to do a system restore on my computer. Now I have a problem launching designer ‘Unable to launch application’.

Also when I try to view projects under Configuration - Projects the web page comes back with an internal error.

I can start designer from the web page but when I try to open project it comes back with an error ‘Unable to load project’

Win Xp and latest version of Ignition.

thanks

hazey

---

<div class="post-metadata">

**Author:** ![hazey](https://avatars.discourse-cdn.com/v4/letter/h/a587f6/32.png) [@hazey](https://forum.inductiveautomation.com/u/hazey)\
**Post date:** [June 5, 2012, 12:17am UTC](https://forum.inductiveautomation.com/t/configure-project-fault/4573/2 "2012-06-05T00:17:30Z")

</div>

Guys not sure what happened but I got it going again by replacing the settings file from an autobackup version. When I replaced those files, all is now OK.

thanks

hazey