# Confirmation 1 and 0

**URL:** <https://forum.inductiveautomation.com/t/confirmation-1-and-0/21134>\
**Category:** Ignition\
**Created:** [November 29, 2018, 2:44pm UTC](https://forum.inductiveautomation.com/t/confirmation-1-and-0/21134 "2018-11-29T14:44:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rroca](https://avatars.discourse-cdn.com/v4/letter/r/43a26b/32.png) [@rroca](https://forum.inductiveautomation.com/u/rroca)\
**Post date:** [November 29, 2018, 2:44pm UTC](https://forum.inductiveautomation.com/t/confirmation-1-and-0/21134/1 "2018-11-29T14:44:39Z")

</div>

Hi everyone,  
Is it possible to ask for a confirmation in a Momentary button using Control Value to send just one pulse ? Or maybe using other button type, but I need just one pulse after the confirmation. 🙏

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [November 29, 2018, 3:35pm UTC](https://forum.inductiveautomation.com/t/confirmation-1-and-0/21134/2 "2018-11-29T15:35:25Z")

</div>

You are asking for grief. Search the forum for “Momentary” for numerous discussions on the pitfalls of any kind of on-off operation separated by any amount of time.  
Consider using a regular button with an actionPerformed script that increments a PLC register (odometer-style), and have the PLC interpret that event as a “pulse” whenever it changes.

---

<div class="post-metadata">

**Author:** ![rroca](https://avatars.discourse-cdn.com/v4/letter/r/43a26b/32.png) [@rroca](https://forum.inductiveautomation.com/u/rroca)\
**Post date:** [November 29, 2018, 3:54pm UTC](https://forum.inductiveautomation.com/t/confirmation-1-and-0/21134/3 "2018-11-29T15:54:26Z")

</div>

Nevermind, I’ve found a solution