# Connected: browse pending **URL:** \ **Category:** Ignition\ **Created:** [April 15, 2021, 12:36pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631 "2021-04-15T12:36:41Z")\ **Posts on this page:** 11\ **Page:** 1
**Author:** ![Seth.williamson](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@Seth.williamson](https://forum.inductiveautomation.com/u/Seth.williamson)\ **Post date:** [April 15, 2021, 12:36pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/1 "2021-04-15T12:36:41Z")
Having issues with one of my device connections it will say connected browse pending or downloading i disabled automatic browsing and i still have the same issue. My connection is a Allen-Bradley ControlLogix (Legacy) connected to an AB L62 V20. This happens randomly every few days i go in refresh the device connection a few times and it will go away and come back constantly. Sometimes for an hour and sometimes for 5 min. ![pending](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/7/47e8910e01abfe9983c5804100054c68c692f2a0.png) ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 15, 2021, 12:53pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/2 "2021-04-15T12:53:17Z")
What firmware version? ---
**Author:** ![Seth.williamson](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@Seth.williamson](https://forum.inductiveautomation.com/u/Seth.williamson)\ **Post date:** [April 15, 2021, 12:53pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/3 "2021-04-15T12:53:52Z")
allen bradley V20 ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 15, 2021, 12:54pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/4 "2021-04-15T12:54:50Z")
That’s just the major version. What is the minor version? What is ‘x’ in 20.x ? ---
**Author:** ![Seth.williamson](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@Seth.williamson](https://forum.inductiveautomation.com/u/Seth.williamson)\ **Post date:** [April 15, 2021, 12:56pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/5 "2021-04-15T12:56:48Z")
20.05 ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 15, 2021, 12:58pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/6 "2021-04-15T12:58:55Z")
What about the version of the 1756-ENxT that the connection goes through? (Should try to make sure that is fully updated.) ---
**Author:** ![Seth.williamson](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@Seth.williamson](https://forum.inductiveautomation.com/u/Seth.williamson)\ **Post date:** [April 15, 2021, 1:30pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/7 "2021-04-15T13:30:53Z")
its revision 4.001 ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 15, 2021, 1:41pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/8 "2021-04-15T13:41:59Z")
The ENBT has a known bug (Per Rockwell’s release notes) in its handling of CIP connections prior to 4.007. Try upgrading that firmware. ---
**Author:** ![Seth.williamson](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@Seth.williamson](https://forum.inductiveautomation.com/u/Seth.williamson)\ **Post date:** [April 15, 2021, 4:05pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/9 "2021-04-15T16:05:55Z")
i have 2 enbt’s on that rack that go to different networks I tried them both the other one is revision 6.001 and it does the same thing so I’m not sure its the revision ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [April 15, 2021, 4:41pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/10 "2021-04-15T16:41:11Z")
Out of ideas. Probably need support to look over your shoulder while it is happening. ---
**Author:** ![Ryan\_Shaw](https://avatars.discourse-cdn.com/v4/letter/r/dbc845/32.png) [@Ryan\_Shaw](https://forum.inductiveautomation.com/u/Ryan_Shaw)\ **Post date:** [January 6, 2025, 5:33pm UTC](https://forum.inductiveautomation.com/t/connected-browse-pending/45631/11 "2025-01-06T17:33:04Z")
I was having the same problem today. It resolved itself without any changes after 10 minutes or so. My ENBT version was 4.004 and PLC driver was Allen-Bradley ControlLogix (Legacy) for PLC version 15.060. I don't have any other supporting details, sorry, but maybe try waiting for a day or so before reaching out to Ignition support for this one.