# Connecting devices using IEC-60870-104 protocol

**URL:** <https://forum.inductiveautomation.com/t/connecting-devices-using-iec-60870-104-protocol/48824>\
**Category:** Ignition\
**Created:** [July 14, 2021, 1:53pm UTC](https://forum.inductiveautomation.com/t/connecting-devices-using-iec-60870-104-protocol/48824 "2021-07-14T13:53:39Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![zarkokv](https://avatars.discourse-cdn.com/v4/letter/z/73ab20/32.png) [@zarkokv](https://forum.inductiveautomation.com/u/zarkokv)\
**Post date:** [July 14, 2021, 1:53pm UTC](https://forum.inductiveautomation.com/t/connecting-devices-using-iec-60870-104-protocol/48824/1 "2021-07-14T13:53:39Z")

</div>

Hello,  
I’m thinking to start with new Ignition project but my main concern is that I must use 104 protocol (I’m from Europe), protocol with I don’t have any experience  
From what I could read on this forum, Ignition don’t have any support for IEC-60870-104 protocol and I should/will use KEPServerEX for this purpose.  
Can anyone write their experience using Ignition with KEPServerEX and protocol 104?  
Thanks’ in advance.