# Connecting Emerson Floboss 107 to Ignition

**URL:** <https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776>\
**Category:** Ignition\
**Created:** [December 11, 2025, 10:53pm UTC](https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776 "2025-12-11T22:53:52Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![chukwuemeka.agu](https://avatars.discourse-cdn.com/v4/letter/c/bb73d2/32.png) [@chukwuemeka.agu](https://forum.inductiveautomation.com/u/chukwuemeka.agu)\
**Post date:** [December 11, 2025, 10:53pm UTC](https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776/1 "2025-12-11T22:53:52Z")

</div>

I am attempting to connect an Emerson FloBoss 107 device to Ignition using the Emerson ROC Protocol. Can anyone provide insight on where I can find the following connection parameters in ROCLink 800:

ROC UNIT Code

ROC Group Code

Host Unit Code

Host Group Code

I am currently using 1,0,1,0 respectively, without success.

Thank you.

---

<div class="post-metadata">

**Author:** ![David\_Stone](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/david_stone/32/79749_2.png) [@David\_Stone](https://forum.inductiveautomation.com/u/David_Stone)\
**Post date:** [December 12, 2025, 12:00am UTC](https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776/2 "2025-12-12T00:00:48Z")

</div>

Probably worth asking this in the Cirrus Link forum.

---

<div class="post-metadata">

**Author:** ![ben.hutche](https://avatars.discourse-cdn.com/v4/letter/b/9fc348/32.png) [@ben.hutche](https://forum.inductiveautomation.com/u/ben.hutche)\
**Post date:** [December 12, 2025, 1:30am UTC](https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776/3 "2025-12-12T01:30:43Z")

</div>

Try the ROC→Information dialog, as well as the ROC→Comm Port→RBX dialog.

---

<div class="post-metadata">

**Author:** ![chukwuemeka.agu](https://avatars.discourse-cdn.com/v4/letter/c/bb73d2/32.png) [@chukwuemeka.agu](https://forum.inductiveautomation.com/u/chukwuemeka.agu)\
**Post date:** [December 12, 2025, 2:11pm UTC](https://forum.inductiveautomation.com/t/connecting-emerson-floboss-107-to-ignition/112776/4 "2025-12-12T14:11:04Z")

</div>

That was it, thank you! It was in the ROC \> Information dialog