# Connecting Ignition to device that support Ethernet/IP (without PLC)

**URL:** <https://forum.inductiveautomation.com/t/connecting-ignition-to-device-that-support-ethernet-ip-without-plc/35576>\
**Category:** Ignition\
**Created:** [June 12, 2020, 1:25am UTC](https://forum.inductiveautomation.com/t/connecting-ignition-to-device-that-support-ethernet-ip-without-plc/35576 "2020-06-12T01:25:56Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![maruthi.addala](https://avatars.discourse-cdn.com/v4/letter/m/b2d939/32.png) [@maruthi.addala](https://forum.inductiveautomation.com/u/maruthi.addala)\
**Post date:** [June 12, 2020, 11:53am UTC](https://forum.inductiveautomation.com/t/connecting-ignition-to-device-that-support-ethernet-ip-without-plc/35576/3 "2020-06-12T11:53:29Z")

</div>

i kind of found this forum from pturmel.. but i am not clear really..

> [@Ignition to EtherNet/IP without a PLC](http://forum.inductiveautomation.com/t/ignition-to-ethernet-ip-without-a-plc/26536/2):
>
> That sounds interesting… [Ethernet/IP Class 1 Communications](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications) (:

Also- Do you think if using any Modules that convert from Ethernet/IP to Modbus TCP will help me to connect from ignition...?

---

_[View the full topic](https://forum.inductiveautomation.com/t/connecting-ignition-to-device-that-support-ethernet-ip-without-plc/35576)._