# Connecting PLC's on different subnet to Gateway

**URL:** <https://forum.inductiveautomation.com/t/connecting-plcs-on-different-subnet-to-gateway/94826>\
**Category:** Ignition\
**Created:** [August 19, 2024, 6:51pm UTC](https://forum.inductiveautomation.com/t/connecting-plcs-on-different-subnet-to-gateway/94826 "2024-08-19T18:51:21Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [August 19, 2024, 7:27pm UTC](https://forum.inductiveautomation.com/t/connecting-plcs-on-different-subnet-to-gateway/94826/7 "2024-08-19T19:27:05Z")

</div>

This thread might be worth a read, sounds like the same problem: [Can anyone recommend a 48 port rack-mountable NAT Switch/Router?](https://forum.inductiveautomation.com/t/can-anyone-recommend-a-48-port-rack-mountable-nat-switch-router/32683)

In any case it sounds like you're looking at a few thousands dollars of networking equipment to get 200+ devices all configured for the same IP address exposed...

---

_[View the full topic](https://forum.inductiveautomation.com/t/connecting-plcs-on-different-subnet-to-gateway/94826)._