# Connecting Tecnomatix Plant Simulation to Ignition OPCUA Server

**URL:** <https://forum.inductiveautomation.com/t/connecting-tecnomatix-plant-simulation-to-ignition-opcua-server/73689>\
**Category:** Ignition\
**Created:** [May 14, 2023, 11:48am UTC](https://forum.inductiveautomation.com/t/connecting-tecnomatix-plant-simulation-to-ignition-opcua-server/73689 "2023-05-14T11:48:08Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [May 14, 2023, 12:09pm UTC](https://forum.inductiveautomation.com/t/connecting-tecnomatix-plant-simulation-to-ignition-opcua-server/73689/2 "2023-05-14T12:09:37Z")

</div>

You already have a topic on this subject open. Multiple postings are against [this forum's rules](https://forum.inductiveautomation.com/faq).

> [@Connecting Tecnomatix Plant Simulation to OPC UA Client through an OPC UA Server](https://forum.inductiveautomation.com/t/connecting-tecnomatix-plant-simulation-to-opc-ua-client-through-an-opc-ua-server/73359):
>
> Working on a project, where we try to connect Tecnomatix Plant Simulation to OPC UA Client(currently using UA Expert, but exploring our options) through an OPC UA server(Currently using IDLE shell to generate a basic server, exploring our options). Has anyone already gone through this process ? I have established connection between the Tecnomatix and Server, but I have issues in writing the code to read paramaters/attribute values from the Tecnomatix Simulation Model in real time. Any help woud…

Continue the discussion in the one topic.

---

_[View the full topic](https://forum.inductiveautomation.com/t/connecting-tecnomatix-plant-simulation-to-ignition-opcua-server/73689)._