# Connecting to Allen Bradley 150 SMC Flex via 20-COMM-E

**URL:** <https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-150-smc-flex-via-20-comm-e/22482>\
**Category:** Ignition\
**Created:** [February 11, 2019, 8:37pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-150-smc-flex-via-20-comm-e/22482 "2019-02-11T20:37:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jkelleyus](https://avatars.discourse-cdn.com/v4/letter/j/3bc359/32.png) [@jkelleyus](https://forum.inductiveautomation.com/u/jkelleyus)\
**Post date:** [February 11, 2019, 8:37pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-150-smc-flex-via-20-comm-e/22482/1 "2019-02-11T20:37:47Z")

</div>

Good afternoon…

I’m looking for information on how to get select data from our 150 SMC Flex-E soft starts. They are equipped with the 20–COMM-E ethernet IP interface.

Specifically I’d like to see phase currents and L/L voltages on all phases.

Has anyone does this and willing to share the setup?

Appreciate any assistance. Thanks!!

John

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [February 12, 2019, 2:41am UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-150-smc-flex-via-20-comm-e/22482/2 "2019-02-12T02:41:33Z")

</div>

I haven’t done it, but it should be possible with my [Ethernet/IP Class1 Comms](https://inductiveautomation.com/moduleshowcase/module/automation-professionals-llc-ethernetip-class-1-communications) module, scanner version, either as I/O or with scripted messaging.