# Connecting to Allen Bradley simulated plc **URL:** \ **Category:** Ignition\ **Created:** [April 22, 2021, 8:20pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930 "2021-04-22T20:20:02Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [April 23, 2021, 1:34pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930/5 "2021-04-23T13:34:53Z")
In Ignition, if using later versions of Emulate, you don't need to do anything different. Use the same Logix driver (enter an IP and slot #). Run a CMD and ipconfig on the image/host running Emulate. This is the IP address you will enter into Ignition. That's it. If you have later versions, Windows 10, etc., it will just work. I haven't spent time figuring out why... honestly I really didn't care. I was just glad it did. Edit, another post discussing this as well. > [@RS Logix Emulator communication with Ignition SCADA](http://forum.inductiveautomation.com/t/rs-logix-emulator-communication-with-ignition-scada/36367): > > Dear Experts, I am new to Ignition SCADA. I want to communicate RS Logix Emulator to Ignition SCADA 8.04. What is the procedure to set up communication between Ignition SCADA and rs Logix emulator. Thanks & Regards Sandeep Bakoliya At first it didn't work for me, as I was using Windows 7. One of the post links a walkthrough. --- _[View the full topic](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930)._