# Connecting to Allen Bradley simulated plc **URL:** \ **Category:** Ignition\ **Created:** [April 22, 2021, 8:20pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930 "2021-04-22T20:20:02Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [April 26, 2021, 3:30pm UTC](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930/7 "2021-04-26T15:30:01Z")
30 & 32, it was in the link above, > [@RS Logix Emulator communication with Ignition SCADA](http://forum.inductiveautomation.com/t/rs-logix-emulator-communication-with-ignition-scada/36367/6): > > I use VM images. I had one image with Win7x64 and installed Emulate v32. I couldn’t get things to work. I used an image with Win10x64 and installed Emulate v32. This worked using both processor versions of 30 and 32 (I didn’t try any more than those). So, not sure what the differences are. I’m guessing Windows as I have the same core software installed on both images. But, from my brief test, as long as you have Emulate 32 installed, you can still use the following processor versions… 20,… --- _[View the full topic](https://forum.inductiveautomation.com/t/connecting-to-allen-bradley-simulated-plc/45930)._