# Connecting to Metasys/Johnson SNE 10502

**URL:** <https://forum.inductiveautomation.com/t/connecting-to-metasys-johnson-sne-10502/110227>\
**Category:** Ignition\
**Created:** [August 27, 2025, 11:20pm UTC](https://forum.inductiveautomation.com/t/connecting-to-metasys-johnson-sne-10502/110227 "2025-08-27T23:20:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![christopherhendee01](https://avatars.discourse-cdn.com/v4/letter/c/9dc877/32.png) [@christopherhendee01](https://forum.inductiveautomation.com/u/christopherhendee01)\
**Post date:** [August 27, 2025, 11:20pm UTC](https://forum.inductiveautomation.com/t/connecting-to-metasys-johnson-sne-10502/110227/1 "2025-08-27T23:20:08Z")

</div>

Hello! I have hit a bit of a road block with trying to connect with this Metasys SNE 10502. The device has the ability to communicate though BACnet/IP but I have yet to have luck getting ignition to initialize the connection. I have reviewed and re-reviewed the local and remote device configurations to ensure that is all right. I have verified that there is no firewall blocking those ports and the remote and local subnets can communicate. I was hoping someone has had luck connecting this device with Ignition and could give me a hand. Thanks!