# Connecting to Micrologix 1400 through CompactLogix 5069

**URL:** <https://forum.inductiveautomation.com/t/connecting-to-micrologix-1400-through-compactlogix-5069/34247>\
**Category:** Ignition\
**Created:** [April 27, 2020, 6:39pm UTC](https://forum.inductiveautomation.com/t/connecting-to-micrologix-1400-through-compactlogix-5069/34247 "2020-04-27T18:39:35Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [April 27, 2020, 7:03pm UTC](https://forum.inductiveautomation.com/t/connecting-to-micrologix-1400-through-compactlogix-5069/34247/3 "2020-04-27T19:03:30Z")

</div>

Some extra reading material. 😉

> [@Connection path for CompactLogix 5380](http://forum.inductiveautomation.com/t/connection-path-for-compactlogix-5380/12697):
>
> The new 5380 series can be configured to use a different IP address on each port. [8)] What would the connection path then be in the attached example? Also, as another thought comes to me, can the target use the legacy driver, or will I need to update to use the v21+ driver, since I’m bridging through a newer unit? [image]

---

_[View the full topic](https://forum.inductiveautomation.com/t/connecting-to-micrologix-1400-through-compactlogix-5069/34247)._