# Connecting to Mitsubishi

**URL:** <https://forum.inductiveautomation.com/t/connecting-to-mitsubishi/9306>\
**Category:** Ignition\
**Created:** [November 7, 2014, 6:21pm UTC](https://forum.inductiveautomation.com/t/connecting-to-mitsubishi/9306 "2014-11-07T18:21:25Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![Duffanator](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/duffanator/32/3560_2.png) [@Duffanator](https://forum.inductiveautomation.com/u/Duffanator)\
**Post date:** [June 22, 2021, 6:56pm UTC](https://forum.inductiveautomation.com/t/connecting-to-mitsubishi/9306/12 "2021-06-22T18:56:34Z")

</div>

Mitsubishi Q series aren’t too difficult to add to Kepware. If you have the QJ71E71-100 Ethernet module you’ll have to open up a port on that through the settings. In Kepware This is what you’ll have to put in for the ID:

example: 192.168.0.10:N1:20

in the format of **IPAddress:Network Number:Station Number**

Under Communication Parameters you’ll match the port number to what you used when you open the port in the QJ71 card:

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/f/1f1a102eb4593ab5c276a3c084ec163e46757d60.png)

QJ71E71-100 Settings:

![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/0/80ed02f0eb4453361190ac5cf22f6c9611ef7a96.png)  
 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/8/48996a123ed98d9900257c259eaa077d322ff79c.png)

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/1/d/1d3fab4babb375541dd20f658c8b4bd83545840b.png)  
The second opened port is for connecting via GXWorks software through the Ethernet port.

---

_[View the full topic](https://forum.inductiveautomation.com/t/connecting-to-mitsubishi/9306)._