# Connecting to Toyopuc (J Tekt) plc

**URL:** <https://forum.inductiveautomation.com/t/connecting-to-toyopuc-j-tekt-plc/108857>\
**Category:** Ignition\
**Created:** [July 23, 2025, 9:28pm UTC](https://forum.inductiveautomation.com/t/connecting-to-toyopuc-j-tekt-plc/108857 "2025-07-23T21:28:09Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![kevin.moore](https://avatars.discourse-cdn.com/v4/letter/k/bb73d2/32.png) [@kevin.moore](https://forum.inductiveautomation.com/u/kevin.moore)\
**Post date:** [July 23, 2025, 9:28pm UTC](https://forum.inductiveautomation.com/t/connecting-to-toyopuc-j-tekt-plc/108857/1 "2025-07-23T21:28:09Z")

</div>

Has anyone used Ignition to connect to a Toyopuc PLC? I'm new to Ignition and was thinking along the lines of trying a generic Ethernet driver, but thought I would ask if anyone has already done this.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 23, 2025, 9:29pm UTC](https://forum.inductiveautomation.com/t/connecting-to-toyopuc-j-tekt-plc/108857/2 "2025-07-23T21:29:40Z")

</div>

[https://www.ptc.com/en/store/products/kepware/suites/toyopuc-suite](https://www.ptc.com/en/store/products/kepware/suites/toyopuc-suite)

---

<div class="post-metadata">

**Author:** ![kevin.moore](https://avatars.discourse-cdn.com/v4/letter/k/bb73d2/32.png) [@kevin.moore](https://forum.inductiveautomation.com/u/kevin.moore)\
**Post date:** [July 23, 2025, 9:43pm UTC](https://forum.inductiveautomation.com/t/connecting-to-toyopuc-j-tekt-plc/108857/3 "2025-07-23T21:43:05Z")

</div>

Thanks! I have used Kepware with Toyopucs in the past. I am keeping that in mind in case I can't get a generic driver to work.