# ControlLogix UDT Tag Members Appear as Folders

**URL:** <https://forum.inductiveautomation.com/t/controllogix-udt-tag-members-appear-as-folders/4335>\
**Category:** Ignition\
**Created:** [April 23, 2012, 3:42pm UTC](https://forum.inductiveautomation.com/t/controllogix-udt-tag-members-appear-as-folders/4335 "2012-04-23T15:42:04Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![Curlyandshemp](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Curlyandshemp](https://forum.inductiveautomation.com/u/Curlyandshemp)\
**Post date:** [May 21, 2014, 11:43pm UTC](https://forum.inductiveautomation.com/t/controllogix-udt-tag-members-appear-as-folders/4335/21 "2014-05-21T23:43:35Z")

</div>

[quote=“Curlyandshemp”][quote=“drewdin”]I am running Version 7.6.4 and I ran into this same exact issue. I needed to restart OPC-UA as stated in this post and it fixed it. Has this not been fixed yet I take it?

Thanks[/quote]

Since upgrading to V7.6.6 I have not seen this issue , as I too experienced.  
BUT, in V7.6.6 the export of UDT tags is broken. This has been acknowledged by Tech Support.  
You have to export all the tags and strip out the UDT tags from the .xml or .csv file.[/quote]

Take it back, just had new complex UDT added to Compactlogix PLC V20 running Ignition V7.6.6 and tags appeared as folders:

[attachment=1]ScreenHunter\_187 May. 21 19.16.jpg[/attachment]

toggle disable/enable and appeared ok:

[attachment=0]ScreenHunter\_188 May. 21 19.18.jpg[/attachment]

---

<div class="post-metadata">

**Author:** ![brian.mills](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/brian.mills/32/6348_2.png) [@brian.mills](https://forum.inductiveautomation.com/u/brian.mills)\
**Post date:** [August 12, 2015, 3:06pm UTC](https://forum.inductiveautomation.com/t/controllogix-udt-tag-members-appear-as-folders/4335/22 "2015-08-12T15:06:14Z")

</div>

Just had a similar thing running 7.7.4, OPC tag appearing as a folder ( Control Logix 5000)

Did the reset Allen Bradley drivers module as Greg recommended and it fixed the problem.

(Problem persists in 7.7.4)

[Previous page](https://forum.inductiveautomation.com/t/controllogix-udt-tag-members-appear-as-folders/4335.md?page=1)