# Conversion from RS View SE to ignition

**URL:** <https://forum.inductiveautomation.com/t/conversion-from-rs-view-se-to-ignition/3094>\
**Category:** General Discussion\
**Created:** [July 13, 2011, 11:21am UTC](https://forum.inductiveautomation.com/t/conversion-from-rs-view-se-to-ignition/3094 "2011-07-13T11:21:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![talhajee1](https://avatars.discourse-cdn.com/v4/letter/t/7c8e57/32.png) [@talhajee1](https://forum.inductiveautomation.com/u/talhajee1)\
**Post date:** [July 13, 2011, 11:21am UTC](https://forum.inductiveautomation.com/t/conversion-from-rs-view-se-to-ignition/3094/1 "2011-07-13T11:21:23Z")

</div>

Hi,  
Is there any way that i can directly convert RS View SE graphics In ignition .

regards

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [July 13, 2011, 3:51pm UTC](https://forum.inductiveautomation.com/t/conversion-from-rs-view-se-to-ignition/3094/2 "2011-07-13T15:51:30Z")

</div>

No, this isn’t currently possible.