# Could not find alarm source filter in alarm status table property of ignition 8.0

**URL:** <https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862>\
**Category:** Ignition\
**Created:** [June 22, 2020, 1:37am UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862 "2020-06-22T01:37:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Premnath.K](https://avatars.discourse-cdn.com/v4/letter/p/b487fb/32.png) [@Premnath.K](https://forum.inductiveautomation.com/u/Premnath.K)\
**Post date:** [June 22, 2020, 1:37am UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862/1 "2020-06-22T01:37:34Z")

</div>

Hi,  
I am trying to filter alarm with source filter but could not find the source filter option & display path filter option in ignition 8.0 in alarm status table property of ignition 8.0. Is this option available in ignition 8 ?

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [June 22, 2020, 12:07pm UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862/2 "2020-06-22T12:07:09Z")

</div>

They’re in the ‘Filters’ Section at the bottom of the properties.  
 ![2020-06-22_8-03-22](https://us1.discourse-cdn.com/inductiveautomation/original/3X/8/e/8efcf919b9dbd8ce3ab04b4deec88c68c3965043.png)

---

<div class="post-metadata">

**Author:** ![Premnath.K](https://avatars.discourse-cdn.com/v4/letter/p/b487fb/32.png) [@Premnath.K](https://forum.inductiveautomation.com/u/Premnath.K)\
**Post date:** [June 22, 2020, 12:47pm UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862/3 "2020-06-22T12:47:10Z")

</div>

Hi,

Is that screenshot of ignition 8 ?  
I have attached the screenshot of my alarm view properties i could not find one…

 ![alarms property editor](https://us1.discourse-cdn.com/inductiveautomation/original/3X/4/a/4a82b20b938beb89d408ac9874f9c3e8a5b53581.png)

---

<div class="post-metadata">

**Author:** ![JordanCClark](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/jordancclark/32/83362_2.png) [@JordanCClark](https://forum.inductiveautomation.com/u/JordanCClark)\
**Post date:** [June 22, 2020, 12:52pm UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862/4 "2020-06-22T12:52:02Z")

</div>

Set your property filter to ‘All’.  
 ![2020-06-22_8-51-33](https://us1.discourse-cdn.com/inductiveautomation/original/3X/c/b/cb85abc025f3218ffc6976ba283fe57939dd024f.png)

---

<div class="post-metadata">

**Author:** ![Premnath.K](https://avatars.discourse-cdn.com/v4/letter/p/b487fb/32.png) [@Premnath.K](https://forum.inductiveautomation.com/u/Premnath.K)\
**Post date:** [June 22, 2020, 1:00pm UTC](https://forum.inductiveautomation.com/t/could-not-find-alarm-source-filter-in-alarm-status-table-property-of-ignition-8-0/35862/5 "2020-06-22T13:00:08Z")

</div>

got it 👍

Thanks