# Created window using designer, cannot log into window using vision client

**URL:** <https://forum.inductiveautomation.com/t/created-window-using-designer-cannot-log-into-window-using-vision-client/45650>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [April 15, 2021, 5:04pm UTC](https://forum.inductiveautomation.com/t/created-window-using-designer-cannot-log-into-window-using-vision-client/45650 "2021-04-15T17:04:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![frank.carney](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@frank.carney](https://forum.inductiveautomation.com/u/frank.carney)\
**Post date:** [April 15, 2021, 5:04pm UTC](https://forum.inductiveautomation.com/t/created-window-using-designer-cannot-log-into-window-using-vision-client/45650/1 "2021-04-15T17:04:20Z")

</div>

I have created a simple window that shows one tag in the designer. I then installed the vision client. When I try to launch the project from the vision client it goes full screen and displays a login window. When entering my username and password it fails to authenticate. I went into the web based gateway and reset the username and pasword to : user and user. I then tried again and it still fails. It is seeing my gateway properly at [http://127.0.0.1:8000](http://127.0.0.1:8000). I verified in the about box of the designer that is indeed my gateway address. What else must I do get it see my default credentials in the gateway?

---

<div class="post-metadata">

**Author:** ![nminchin](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/nminchin/32/6911_2.png) [@nminchin](https://forum.inductiveautomation.com/u/nminchin)\
**Post date:** [April 15, 2021, 6:21pm UTC](https://forum.inductiveautomation.com/t/created-window-using-designer-cannot-log-into-window-using-vision-client/45650/2 "2021-04-15T18:21:55Z")

</div>

Did you set an identity provider and a user source in your project properties?

 ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/2/8/28f6e568f300f81b68d1a164c7dfc186a1b6c094.png)

---

<div class="post-metadata">

**Author:** ![frank.carney](https://avatars.discourse-cdn.com/v4/letter/f/d6d6ee/32.png) [@frank.carney](https://forum.inductiveautomation.com/u/frank.carney)\
**Post date:** [April 15, 2021, 7:32pm UTC](https://forum.inductiveautomation.com/t/created-window-using-designer-cannot-log-into-window-using-vision-client/45650/3 "2021-04-15T19:32:54Z")

</div>

For some reason my User Source was set to opcua-module instead of default.  
Now it works! Thank you!