# Creating a new configuration page for my custom module (Ignition 8.1.48)

**URL:** <https://forum.inductiveautomation.com/t/creating-a-new-configuration-page-for-my-custom-module-ignition-8-1-48/113479>\
**Category:** Module Development\
**Created:** [January 22, 2026, 1:31pm UTC](https://forum.inductiveautomation.com/t/creating-a-new-configuration-page-for-my-custom-module-ignition-8-1-48/113479 "2026-01-22T13:31:29Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![isabela.parreiras](https://avatars.discourse-cdn.com/v4/letter/i/9fc348/32.png) [@isabela.parreiras](https://forum.inductiveautomation.com/u/isabela.parreiras)\
**Post date:** [January 22, 2026, 1:31pm UTC](https://forum.inductiveautomation.com/t/creating-a-new-configuration-page-for-my-custom-module-ignition-8-1-48/113479/1 "2026-01-22T13:31:29Z")

</div>

I’m developing a custom module for ignition and I’m having a hard time finding documentation and tips on how I can create my own module configuration page, ideally to show up under the security tab once the module is installed on ignition. I’d like to have a button to activate and deactivate the module, a label to show the module status (if it’s running or not) and a button to import users from ignitions and put them inside my module. If anyone has any tips/help about this I’d really appreciate it.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [January 22, 2026, 2:00pm UTC](https://forum.inductiveautomation.com/t/creating-a-new-configuration-page-for-my-custom-module-ignition-8-1-48/113479/2 "2026-01-22T14:00:01Z")

</div>

Helpful material:

> [@\[IGN-12948\] WebUIComponent Example?](https://forum.inductiveautomation.com/t/ign-12948-webuicomponent-example/103072):
>
> I mentioned over here: ... that I was able to migrate my IDB resources with the help of the extension point migrator's "augmenter" hook, so I could handle my file-based configuration resources. Now I'm trying to expose those file resources for the devices based on an extra MenuAction and am stumped. I cannot see how to construct a WebUIComponent (via ReactComponentInfo I presume) so I can supply it via the MenuAction. I don't really need a full editor at this time, just upload and retrieva…

Note that the example in IA's github repo is quite bare bones. You'll need quite a bit of fleshing out.