# Creating Specific Alarm Details

**URL:** <https://forum.inductiveautomation.com/t/creating-specific-alarm-details/33580>\
**Category:** Ignition\
**Created:** [April 1, 2020, 8:31am UTC](https://forum.inductiveautomation.com/t/creating-specific-alarm-details/33580 "2020-04-01T08:31:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![geoffrey.awa](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@geoffrey.awa](https://forum.inductiveautomation.com/u/geoffrey.awa)\
**Post date:** [April 1, 2020, 8:31am UTC](https://forum.inductiveautomation.com/t/creating-specific-alarm-details/33580/1 "2020-04-01T08:31:11Z")

</div>

I am trying to create an alarm for several instruments, that when ever i select a particular instrument it will give me the alarm status of a singular instrument. Rather than having all instrument alarm popup in the Alarm status page. Please how can this be achieved.

Thanks

---

<div class="post-metadata">

**Author:** ![mpoulsen921](https://avatars.discourse-cdn.com/v4/letter/m/b4bc9f/32.png) [@mpoulsen921](https://forum.inductiveautomation.com/u/mpoulsen921)\
**Post date:** [April 2, 2020, 6:21am UTC](https://forum.inductiveautomation.com/t/creating-specific-alarm-details/33580/2 "2020-04-02T06:21:45Z")

</div>

Hi Geoffrey,

Not entirely sure on the use case here, but you could use the Alarm Status Table and then on the properties “Display Path Filter” or “Source Filter” you could make a binding that will only show the alarms for the selected instrument.

---

<div class="post-metadata">

**Author:** ![geoffrey.awa](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@geoffrey.awa](https://forum.inductiveautomation.com/u/geoffrey.awa)\
**Post date:** [April 2, 2020, 10:37am UTC](https://forum.inductiveautomation.com/t/creating-specific-alarm-details/33580/3 "2020-04-02T10:37:11Z")

</div>

Would try that and give you a feedback.  
Thanks.