# Custom Serial Protocol Device

**URL:** <https://forum.inductiveautomation.com/t/custom-serial-protocol-device/112655>\
**Category:** Ignition\
**Created:** [December 5, 2025, 5:22pm UTC](https://forum.inductiveautomation.com/t/custom-serial-protocol-device/112655 "2025-12-05T17:22:40Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![pfeif](https://avatars.discourse-cdn.com/v4/letter/p/a87d85/32.png) [@pfeif](https://forum.inductiveautomation.com/u/pfeif)\
**Post date:** [December 5, 2025, 8:41pm UTC](https://forum.inductiveautomation.com/t/custom-serial-protocol-device/112655/3 "2025-12-05T20:41:53Z")

</div>

Alright. I’m guessing this [thread](https://forum.inductiveautomation.com/t/opening-sockets-to-tcp-devices-using-scripting/76860/7) is relevant then? I’ll go this route and report back if needed. Thanks

---

_[View the full topic](https://forum.inductiveautomation.com/t/custom-serial-protocol-device/112655)._