# Customize Alarm Priority **URL:** \ **Category:** Ignition\ **Tags:** ignition80\ **Created:** [April 26, 2021, 11:34pm UTC](https://forum.inductiveautomation.com/t/customize-alarm-priority/46049 "2021-04-26T23:34:26Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![jlandwerlen](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@jlandwerlen](https://forum.inductiveautomation.com/u/jlandwerlen)\ **Post date:** [April 26, 2021, 11:35pm UTC](https://forum.inductiveautomation.com/t/customize-alarm-priority/46049/2 "2021-04-26T23:35:53Z")
Reference this post: > [@Create New Alarm Priority/Class](http://forum.inductiveautomation.com/t/create-new-alarm-priority-class/38736): > > Hi all, I’ve been looking into Ignition as a potential SCADA solution for our future projects and came across smth that I can not figure out. In process industries it is very common to follow IEC 62682 (Alarm Management) standard. Long story short, it means that every project can and should define what alarms classes it want to use. Hence my question: is it possible to add new alarm priorities to the ones already defined in Ignition (Diagnostic/Low/Medium/High/Critical)? Or is it possible to … Edit, you could add associated data though or add to the label or description if the priority is low. --- _[View the full topic](https://forum.inductiveautomation.com/t/customize-alarm-priority/46049)._