# Cycle Status Banner

**URL:** <https://forum.inductiveautomation.com/t/cycle-status-banner/29456>\
**Category:** Ignition\
**Created:** [October 28, 2019, 5:44pm UTC](https://forum.inductiveautomation.com/t/cycle-status-banner/29456 "2019-10-28T17:44:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![john.fleming](https://avatars.discourse-cdn.com/v4/letter/j/b2d939/32.png) [@john.fleming](https://forum.inductiveautomation.com/u/john.fleming)\
**Post date:** [October 28, 2019, 5:44pm UTC](https://forum.inductiveautomation.com/t/cycle-status-banner/29456/1 "2019-10-28T17:44:45Z")

</div>

I plan on using a multi-state indicator to display the cycle status of a machine. I would like to view an example.

---

<div class="post-metadata">

**Author:** ![dkhayes117](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/dkhayes117/32/68344_2.png) [@dkhayes117](https://forum.inductiveautomation.com/u/dkhayes117)\
**Post date:** [October 28, 2019, 6:30pm UTC](https://forum.inductiveautomation.com/t/cycle-status-banner/29456/2 "2019-10-28T18:30:57Z")

</div>

This is a pretty simple component to work with. Just bind the state property to your machine status tag. Right click the component, then go to customizers, then select style customizer. Change the style for each defined state of your machine. [Here](https://docs.inductiveautomation.com/display/DOC79/Multi-State+Indicator) is the IA manual entry on this component.