# Data From Mettler Toledo IND360

**URL:** <https://forum.inductiveautomation.com/t/data-from-mettler-toledo-ind360/107785>\
**Category:** Ignition\
**Tags:** ignition81\
**Created:** [June 25, 2025, 5:24pm UTC](https://forum.inductiveautomation.com/t/data-from-mettler-toledo-ind360/107785 "2025-06-25T17:24:08Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pico\_Sankari](https://avatars.discourse-cdn.com/v4/letter/p/aeb1de/32.png) [@Pico\_Sankari](https://forum.inductiveautomation.com/u/Pico_Sankari)\
**Post date:** [June 25, 2025, 5:24pm UTC](https://forum.inductiveautomation.com/t/data-from-mettler-toledo-ind360/107785/1 "2025-06-25T17:24:08Z")

</div>

I'm trying to get data from a MT IND360 scale over the network. It uses MT-SICS to communicate and I'm struggling to figure out how to set this up. Has anyone done this before? It seems like some a socket connection might be the answer, but I haven't been able to get this to work. I also found this post: [Mettler-Toledo SICS](https://forum.inductiveautomation.com/t/mettler-toledo-sics/5997), but the module link doesn't work.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [June 25, 2025, 5:38pm UTC](https://forum.inductiveautomation.com/t/data-from-mettler-toledo-ind360/107785/2 "2025-06-25T17:38:23Z")

</div>

> [@Pico\_Sankari](#):
>
> but the module link doesn't work.

It wouldn't, that module no longer exists. I think was only available up until Ignition 7.7.