# Data type timer of Logo Siemens **URL:** \ **Category:** Ignition\ **Created:** [July 9, 2019, 11:58pm UTC](https://forum.inductiveautomation.com/t/data-type-timer-of-logo-siemens/26414 "2019-07-09T23:58:57Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![ymontero](https://avatars.discourse-cdn.com/v4/letter/y/e99b99/32.png) [@ymontero](https://forum.inductiveautomation.com/u/ymontero)\ **Post date:** [July 9, 2019, 11:58pm UTC](https://forum.inductiveautomation.com/t/data-type-timer-of-logo-siemens/26414/1 "2019-07-09T23:58:57Z")
Hello friends, I’m trying to bring some Timer data from a Siemens PLC Logo. For this I am using the s7 1200 driver and I have tried with some other addresses such as inputs, outputs, brands, and I have no problem. However, when trying to obtain values ​​from the timers it is not possible to read the data ---
**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\ **Post date:** [July 10, 2019, 12:10am UTC](https://forum.inductiveautomation.com/t/data-type-timer-of-logo-siemens/26414/2 "2019-07-10T00:10:02Z")
The Siemens 1200/1500 drivers cannot access timer or counter areas: [https://docs.inductiveautomation.com/display/DOC80/Siemens](https://docs.inductiveautomation.com/display/DOC80/Siemens) ---
**Author:** ![ymontero](https://avatars.discourse-cdn.com/v4/letter/y/e99b99/32.png) [@ymontero](https://forum.inductiveautomation.com/u/ymontero)\ **Post date:** [July 10, 2019, 12:44am UTC](https://forum.inductiveautomation.com/t/data-type-timer-of-logo-siemens/26414/3 "2019-07-10T00:44:55Z")
Greetings Kevin thank you for your prompt response. I have assigned those values ​​of the timers to a Dword address to see if I can access them. However I have not been successful. Do you have any suggestions for these cases?