# Deadband mode on Query Tags

**URL:** <https://forum.inductiveautomation.com/t/deadband-mode-on-query-tags/71197>\
**Category:** Ignition\
**Tags:** ignition80\
**Created:** [March 16, 2023, 10:41pm UTC](https://forum.inductiveautomation.com/t/deadband-mode-on-query-tags/71197 "2023-03-16T22:41:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Muhammad\_Anas](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@Muhammad\_Anas](https://forum.inductiveautomation.com/u/Muhammad_Anas)\
**Post date:** [March 16, 2023, 10:41pm UTC](https://forum.inductiveautomation.com/t/deadband-mode-on-query-tags/71197/1 "2023-03-16T22:41:02Z")

</div>

I have created some query tags with simple SELECT queries and FLOAT datatype. I have selected FIXED execution mode with a rate of 1 second. The problem is that these tags are not executing at all. I have double checked my queries in the query browser and they run perfectly find and within milliseconds. My deadband is set to zero in tag properties. I have checked and verified everything that I can think of but I just cannot get these tags to execute their queries at the defined rate. They are ONLY executing when the tags are restarted.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [March 16, 2023, 11:29pm UTC](https://forum.inductiveautomation.com/t/deadband-mode-on-query-tags/71197/2 "2023-03-16T23:29:12Z")

</div>

What version of Ignition are you using? There was a regression in 8.1.20 that could cause DB tags to not execute... if it's not that then you may need to call support and let them take a look.