# Designer Client hangs up

**URL:** <https://forum.inductiveautomation.com/t/designer-client-hangs-up/3349>\
**Category:** Ignition\
**Created:** [September 27, 2011, 5:32pm UTC](https://forum.inductiveautomation.com/t/designer-client-hangs-up/3349 "2011-09-27T17:32:17Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmoniz](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jmoniz](https://forum.inductiveautomation.com/u/jmoniz)\
**Post date:** [September 27, 2011, 5:32pm UTC](https://forum.inductiveautomation.com/t/designer-client-hangs-up/3349/1 "2011-09-27T17:32:17Z")

</div>

For about the last week or so. I have had issues making changes within the designer and then saving them. Sometimes it takes the designer 2-3 Min to save the project.

Where should I start looking for issues?

The gateway status page shows it’s about 2% utillized. The gatway server is a IBM 3650 with 12 gig of mem rinning windows server 2008. From all that i can see network traffic is minimal.

Thanks  
JP

---

<div class="post-metadata">

**Author:** ![Travis.Cox](https://avatars.discourse-cdn.com/v4/letter/t/b9bd4f/32.png) [@Travis.Cox](https://forum.inductiveautomation.com/u/Travis.Cox)\
**Post date:** [September 28, 2011, 12:54am UTC](https://forum.inductiveautomation.com/t/designer-client-hangs-up/3349/2 "2011-09-28T00:54:24Z")

</div>

Do you have windows open when you press save? If you do, try closing all windows first and saving to see if it takes the same amount of time.

---

<div class="post-metadata">

**Author:** ![jmoniz](https://avatars.discourse-cdn.com/v4/letter/j/5daacb/32.png) [@jmoniz](https://forum.inductiveautomation.com/u/jmoniz)\
**Post date:** [September 28, 2011, 7:20pm UTC](https://forum.inductiveautomation.com/t/designer-client-hangs-up/3349/3 "2011-09-28T19:20:50Z")

</div>

This issue has been solved. Cause was not having a cell beneath a line in the OEE module production model.