# Designer Confirmation Exit GUI Bug with 4k Monitor **URL:** \ **Category:** Ignition\ **Tags:** ignition81, perspective\ **Created:** [February 27, 2024, 2:16pm UTC](https://forum.inductiveautomation.com/t/designer-confirmation-exit-gui-bug-with-4k-monitor/86433 "2024-02-27T14:16:04Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![liam1](https://avatars.discourse-cdn.com/v4/letter/l/e68b1a/32.png) [@liam1](https://forum.inductiveautomation.com/u/liam1)\ **Post date:** [February 27, 2024, 2:16pm UTC](https://forum.inductiveautomation.com/t/designer-confirmation-exit-gui-bug-with-4k-monitor/86433/1 "2024-02-27T14:16:04Z")
Hi all, I'm running two 4k monitors and one 1080p laptop screen. When trying to close the designer , the "Confirm Exit" popup GUI is clipping off the buttons. ![image](https://us1.discourse-cdn.com/inductiveautomation/original/3X/3/7/37aa12e3c777353befe883ee25870619a0adc638.png) This issue doesn't occur if I use1080p monitors. Is there a way to fix this without having to change my monitor resolutions? ---
**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\ **Post date:** [February 27, 2024, 2:42pm UTC](https://forum.inductiveautomation.com/t/designer-confirmation-exit-gui-bug-with-4k-monitor/86433/2 "2024-02-27T14:42:09Z")
Are you using scaling on the 4k monitors? If so, try using only 100% or 200%, nothing in between. ---
**Author:** ![Tobias\_Berndt](https://avatars.discourse-cdn.com/v4/letter/t/3e96dc/32.png) [@Tobias\_Berndt](https://forum.inductiveautomation.com/u/Tobias_Berndt)\ **Post date:** [April 10, 2024, 6:19am UTC](https://forum.inductiveautomation.com/t/designer-confirmation-exit-gui-bug-with-4k-monitor/86433/3 "2024-04-10T06:19:43Z")
I used 200% and had the same issue. If i lower it to 100% it was clickable but 100% on 4k is not good to work with. 🙂