# Designer Security

**URL:** <https://forum.inductiveautomation.com/t/designer-security/5386>\
**Category:** General Discussion\
**Created:** [November 7, 2012, 9:37pm UTC](https://forum.inductiveautomation.com/t/designer-security/5386 "2012-11-07T21:37:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dustin.Phillips](https://avatars.discourse-cdn.com/v4/letter/d/45deac/32.png) [@Dustin.Phillips](https://forum.inductiveautomation.com/u/Dustin.Phillips)\
**Post date:** [November 7, 2012, 9:37pm UTC](https://forum.inductiveautomation.com/t/designer-security/5386/1 "2012-11-07T21:37:31Z")

</div>

Is there a way to limit a designer to only a select list of projects? I have several projects that have sensitive information I would like to limit access to.

Thanks!  
Dustin

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [November 7, 2012, 10:06pm UTC](https://forum.inductiveautomation.com/t/designer-security/5386/2 "2012-11-07T22:06:58Z")

</div>

Unfortunately, no, there currently is not a way to disable any of the projects from being seen in the designer. If you have access to the designer, you have access to all of the projects.

---

<div class="post-metadata">

**Author:** ![Robert](https://avatars.discourse-cdn.com/v4/letter/r/e95f7d/32.png) [@Robert](https://forum.inductiveautomation.com/u/Robert)\
**Post date:** [November 7, 2012, 10:56pm UTC](https://forum.inductiveautomation.com/t/designer-security/5386/3 "2012-11-07T22:56:45Z")

</div>

Your best best in this case is to use multiple gateways. You can always link the projects using retarging to present a seamless experience to the end user.