# Designer Spinner

**URL:** <https://forum.inductiveautomation.com/t/designer-spinner/8119>\
**Category:** Ignition\
**Created:** [March 7, 2014, 4:07pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119 "2014-03-07T16:07:43Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![stuartd](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@stuartd](https://forum.inductiveautomation.com/u/stuartd)\
**Post date:** [March 7, 2014, 4:07pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119/1 "2014-03-07T16:07:43Z")

</div>

When adding a titled border to the Spinner the buttons do not evenly space out at all. The border only takes from the scroll up. It should even the space out between them so that the up and down will be the same size.

---

<div class="post-metadata">

**Author:** ![greg.simpson](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/greg.simpson/32/3135_2.png) [@greg.simpson](https://forum.inductiveautomation.com/u/greg.simpson)\
**Post date:** [March 7, 2014, 4:33pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119/2 "2014-03-07T16:33:51Z")

</div>

stuartd,

Thank you for bringing this to our attention, I will create a ticket to have this looked at. I will update this thread when I have additional information.

---

<div class="post-metadata">

**Author:** ![stuartd](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@stuartd](https://forum.inductiveautomation.com/u/stuartd)\
**Post date:** [March 7, 2014, 4:44pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119/3 "2014-03-07T16:44:29Z")

</div>

Thanks Greg.

---

<div class="post-metadata">

**Author:** ![Carl.Gould](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/carl.gould/32/7262_2.png) [@Carl.Gould](https://forum.inductiveautomation.com/u/Carl.Gould)\
**Post date:** [March 7, 2014, 4:57pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119/4 "2014-03-07T16:57:27Z")

</div>

Unfortunately there’s not much we can do about this one. I suggest putting the titled border on a container and putting the spinner in the container as a workaround. You can make a template out of it if this is a common thing that you use.

---

<div class="post-metadata">

**Author:** ![stuartd](https://avatars.discourse-cdn.com/v4/letter/s/ecae2f/32.png) [@stuartd](https://forum.inductiveautomation.com/u/stuartd)\
**Post date:** [March 7, 2014, 7:22pm UTC](https://forum.inductiveautomation.com/t/designer-spinner/8119/5 "2014-03-07T19:22:36Z")

</div>

overall, we use a titled border on everything. thank you for the suggestion.