# Designer will not start on Raspberry PI 4

**URL:** <https://forum.inductiveautomation.com/t/designer-will-not-start-on-raspberry-pi-4/37610>\
**Category:** Maker\
**Created:** [August 11, 2020, 3:08pm UTC](https://forum.inductiveautomation.com/t/designer-will-not-start-on-raspberry-pi-4/37610 "2020-08-11T15:08:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mark.marusich](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@mark.marusich](https://forum.inductiveautomation.com/u/mark.marusich)\
**Post date:** [August 11, 2020, 3:08pm UTC](https://forum.inductiveautomation.com/t/designer-will-not-start-on-raspberry-pi-4/37610/1 "2020-08-11T15:08:54Z")

</div>

Designer will not start on Raspberry PI 4.  
Anybody have a idea why not?

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [August 11, 2020, 3:19pm UTC](https://forum.inductiveautomation.com/t/designer-will-not-start-on-raspberry-pi-4/37610/2 "2020-08-11T15:19:12Z")

</div>

> [@RPi designer question](http://forum.inductiveautomation.com/t/rpi-designer-question/36907/2):
>
> You can install the Ignition Gateway on a RPi but you’ll need to run the Designer from a different machine. It won’t run on the RPi itself.

There’s no JavaFX on ARM builds right now. Or JXBrowser support.