# Difference Between Meter Range Shows in Ignition Designer & Launched Project **URL:** \ **Category:** Ignition\ **Created:** [July 1, 2018, 9:15am UTC](https://forum.inductiveautomation.com/t/difference-between-meter-range-shows-in-ignition-designer-launched-project/18685 "2018-07-01T09:15:21Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Yap\_Him\_Wah](https://avatars.discourse-cdn.com/v4/letter/y/e68b1a/32.png) [@Yap\_Him\_Wah](https://forum.inductiveautomation.com/u/Yap_Him_Wah)\ **Post date:** [July 1, 2018, 9:15am UTC](https://forum.inductiveautomation.com/t/difference-between-meter-range-shows-in-ignition-designer-launched-project/18685/1 "2018-07-01T09:15:21Z")
[difference between meter range before and after launching.pdf](https://us1.discourse-cdn.com/inductiveautomation/original/2X/3/3b5f0a4da6c6214621d611cd242ec7bdc1ca42d8.pdf) (148.7 KB) Hi Paul, Thank you very much for your advice on the meter’s overall low bound and overall high bound in Ignition Designer. I have removed the bindings from the above-mentioned engineering limits and it is working as expected. ---
**Author:** ![paul-griffith](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/paul-griffith/32/37249_2.png) [@paul-griffith](https://forum.inductiveautomation.com/u/paul-griffith)\ **Post date:** [July 2, 2018, 3:01pm UTC](https://forum.inductiveautomation.com/t/difference-between-meter-range-shows-in-ignition-designer-launched-project/18685/2 "2018-07-02T15:01:31Z")
You have bindings on the various properties of the component; those bindings will not be automatically re-evaluated within the designer (unless you close and re-open the window). Remove the bindings and the component will keep the values you specified in the designer. Those bindings are automatically created when you drag a tag in from the tag browser to create a component; it uses internal tag properties such as the engineering limits to define the values on components such as the meter.