# Disable Tag with parameter

**URL:** <https://forum.inductiveautomation.com/t/disable-tag-with-parameter/31802>\
**Category:** Ignition\
**Created:** [January 30, 2020, 10:06pm UTC](https://forum.inductiveautomation.com/t/disable-tag-with-parameter/31802 "2020-01-30T22:06:48Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [January 30, 2020, 10:21pm UTC](https://forum.inductiveautomation.com/t/disable-tag-with-parameter/31802/2 "2020-01-30T22:21:23Z")

</div>

Didn't you just ask this in another thread?

> [@Tag reference to a parameter in a UDT](http://forum.inductiveautomation.com/t/tag-reference-to-a-parameter-in-a-udt/31769):
>
> Hi, in a UDT, I can’t make a tag reference that point to a parameter. Also I can’t disable a tag with a logic condition with this parameter. Ex: (UDT) Motor-\> Parameter - numberMotor (tag OPC) Amps\> enabled property (disabled if numberMotor = 2) (tag reference) motorType\> value (point to nomberMotor)

Sometimes there's no answer because nobody knows an answer. Sometimes you have to wait a day or two before the right person sees the question.

---

_[View the full topic](https://forum.inductiveautomation.com/t/disable-tag-with-parameter/31802)._