# Display path filter with number

**URL:** <https://forum.inductiveautomation.com/t/display-path-filter-with-number/103860>\
**Category:** Ignition\
**Created:** [March 19, 2025, 4:15am UTC](https://forum.inductiveautomation.com/t/display-path-filter-with-number/103860 "2025-03-19T04:15:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wayne\_Wessel](https://avatars.discourse-cdn.com/v4/letter/w/58956e/32.png) [@Wayne\_Wessel](https://forum.inductiveautomation.com/u/Wayne_Wessel)\
**Post date:** [March 19, 2025, 4:15am UTC](https://forum.inductiveautomation.com/t/display-path-filter-with-number/103860/1 "2025-03-19T04:15:34Z")

</div>

Some of my alarms are bit position alarms from an array of integers, so I have paths ending in a number with a bit reference, e.g. .../Alarm1/bit12  
If I use a Display path filter of \*Alarm1/bit\* it shows no matches, however removing the / by using \*Alarm1\*bit\* will work.  
It seems like having a number followed by forward slash breaks the search. Is this some sort of special character?