# Displaying Alarm Count **URL:** \ **Category:** Ignition\ **Tags:** scripting\ **Created:** [September 22, 2017, 2:17pm UTC](https://forum.inductiveautomation.com/t/displaying-alarm-count/15443 "2017-09-22T14:17:46Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![R.Alamsha](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@R.Alamsha](https://forum.inductiveautomation.com/u/R.Alamsha)\ **Post date:** [September 4, 2018, 1:21pm UTC](https://forum.inductiveautomation.com/t/displaying-alarm-count/15443/8 "2018-09-04T13:21:15Z")
> [@paul.bouillon](#): > > Right... so that basically uses that 'runscript' method to determine the alarm counts within the template instance: Check out this one. > [@Alarm active counter?](http://forum.inductiveautomation.com/t/alarm-active-counter/19515/2): > > Not sure if this what you are looking for. But i think, you can tweak and customize it to suit your requirement. This Alarm counter template can filter any string in the "Template properties/Displaypath" filter and can display the filtered alarms count. This is case insensitive. You can cross check by filtering Alarms in the "Alarm status table/Display Path Filter" and copy/paste the same string into this template's filter. Note: "Alarm status table/Display Path Filter" is case sensitive. [… --- _[View the full topic](https://forum.inductiveautomation.com/t/displaying-alarm-count/15443)._