# DNP Driver Setup

**URL:** <https://forum.inductiveautomation.com/t/dnp-driver-setup/17398>\
**Category:** General Discussion\
**Created:** [March 16, 2018, 10:36pm UTC](https://forum.inductiveautomation.com/t/dnp-driver-setup/17398 "2018-03-16T22:36:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jasonpdavid](https://avatars.discourse-cdn.com/v4/letter/j/8edcca/32.png) [@jasonpdavid](https://forum.inductiveautomation.com/u/jasonpdavid)\
**Post date:** [March 16, 2018, 10:36pm UTC](https://forum.inductiveautomation.com/t/dnp-driver-setup/17398/1 "2018-03-16T22:36:42Z")

</div>

Has anyone successfully established DNP driver communications? I have configured a ScadaPack 334 to send DNP events to Ignition but the data is quality is showing bad. I have a successful link as the Ignition Quick Client has updated with the DNP addresses I configured in the ScadaPack. Only thing left is to get a good value…