# DNP3 Driver, Ignition vs KEPServerEX

**URL:** <https://forum.inductiveautomation.com/t/dnp3-driver-ignition-vs-kepserverex/39859>\
**Category:** Ignition\
**Created:** [October 20, 2020, 10:44pm UTC](https://forum.inductiveautomation.com/t/dnp3-driver-ignition-vs-kepserverex/39859 "2020-10-20T22:44:06Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kerwin.grapa](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@kerwin.grapa](https://forum.inductiveautomation.com/u/kerwin.grapa)\
**Post date:** [October 20, 2020, 10:44pm UTC](https://forum.inductiveautomation.com/t/dnp3-driver-ignition-vs-kepserverex/39859/1 "2020-10-20T22:44:06Z")

</div>

Good day,

I am posting for opinions or feedback on between Ignition DNP3 Driver and KEPServerEX DNP3 Suite on their functionality. I have not yet tested the drivers. I have tested with the simulation of KEPServerEX and successfully connected through OPC UA but I have no device to test for the DNP3 Driver on both. Any feedbacks would be very much appreciated.

Thank you very much.