# DNP3 Pulse commands not working

**URL:** <https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333>\
**Category:** Ignition\
**Tags:** ignition81, perspective\
**Created:** [May 13, 2024, 8:35pm UTC](https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333 "2024-05-13T20:35:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Hanamant\_Sulikeri](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@Hanamant\_Sulikeri](https://forum.inductiveautomation.com/u/Hanamant_Sulikeri)\
**Post date:** [May 13, 2024, 8:35pm UTC](https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333/1 "2024-05-13T20:35:03Z")

</div>

Hello,

We are using Ignition Edge (Perspective), communication with SEL-RTAC on DNP3.  
We were not able to send Pulse commands (Binary Outputs) to RTAC. In RTAC we are receiving commands on LatchOn bit.

---

<div class="post-metadata">

**Author:** ![msteele](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/msteele/32/77889_2.png) [@msteele](https://forum.inductiveautomation.com/u/msteele)\
**Post date:** [May 13, 2024, 10:04pm UTC](https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333/2 "2024-05-13T22:04:48Z")

</div>

New DNP3 driver or legacy?

---

<div class="post-metadata">

**Author:** ![Hanamant\_Sulikeri](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@Hanamant\_Sulikeri](https://forum.inductiveautomation.com/u/Hanamant_Sulikeri)\
**Post date:** [May 17, 2024, 2:42pm UTC](https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333/3 "2024-05-17T14:42:20Z")

</div>

Hello MSteele,  
Thanks for looking into my issue.  
We are using Ignition Edge platform V 8.1.28.  
SEL RTAC is running latest firmware 151.  
We are using DNP3 server in the RTAC, Ignition Edge HMI as a client.  
I'm not sure Ignition V 8.1.28 is the new DNP3 or Legacy.

---

<div class="post-metadata">

**Author:** ![Kevin.Herron](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/kevin.herron/32/7259_2.png) [@Kevin.Herron](https://forum.inductiveautomation.com/u/Kevin.Herron)\
**Post date:** [May 17, 2024, 2:48pm UTC](https://forum.inductiveautomation.com/t/dnp3-pulse-commands-not-working/90333/4 "2024-05-17T14:48:14Z")

</div>

How are you trying to send the commands?