# Do More PLC and Ignition

**URL:** <https://forum.inductiveautomation.com/t/do-more-plc-and-ignition/7185>\
**Category:** Archived Topics\
**Created:** [September 3, 2013, 11:22pm UTC](https://forum.inductiveautomation.com/t/do-more-plc-and-ignition/7185 "2013-09-03T23:22:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Henry](https://avatars.discourse-cdn.com/v4/letter/h/df705f/32.png) [@Henry](https://forum.inductiveautomation.com/u/Henry)\
**Post date:** [September 3, 2013, 11:22pm UTC](https://forum.inductiveautomation.com/t/do-more-plc-and-ignition/7185/1 "2013-09-03T23:22:49Z")

</div>

Has anyone used the Do More PLC with Ignition?

---

<div class="post-metadata">

**Author:** ![thutchis](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@thutchis](https://forum.inductiveautomation.com/u/thutchis)\
**Post date:** [February 2, 2016, 1:06am UTC](https://forum.inductiveautomation.com/t/do-more-plc-and-ignition/7185/2 "2016-02-02T01:06:16Z")

</div>

I am a complete PLC/SCADA/HMI newbie. But we are looking at using Ignition with a AD DoMore PLC. I wish we could browse the tags through the Modbus connection like you can with AB. Lots to learn.