# Docked Navigation window width scaling issues 4K monitor **URL:** \ **Category:** Ignition\ **Created:** [December 7, 2017, 4:37pm UTC](https://forum.inductiveautomation.com/t/docked-navigation-window-width-scaling-issues-4k-monitor/16248 "2017-12-07T16:37:15Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![kredilla](https://avatars.discourse-cdn.com/v4/letter/k/3d9bf3/32.png) [@kredilla](https://forum.inductiveautomation.com/u/kredilla)\ **Post date:** [December 7, 2017, 4:37pm UTC](https://forum.inductiveautomation.com/t/docked-navigation-window-width-scaling-issues-4k-monitor/16248/1 "2017-12-07T16:37:16Z")
Hello all, I’m trying to set up an Ignition project for a 55" touchscreen 4K monitor, and I’m running into some issues with scaling from the designer to the monitor! I did some reading around the forums and there have been similar issues, but I figured this type of application (and so these types of issues) will only become more common. The immediate problem I am experiencing is: my Navigation window (docked West) will not get any wider. It seems I’ve tried every combination of layout + changing the actual window size, and yet the docked window does not get any wider. Currently, I have it Anchored Top, Left, and Bottom, which gives me a navigation window that is just too skinny, regardless of how wide I make the window in the designer. I may simultaneously be battling the good ol’ Windows 10/Java high DPI scaling behavior as well, because a push button component, as well as the default menu bar, seem much too small. I wouldn’t think that to be the reason I can’t get the Nav window to maintain the desired width, but I also wonder if the problems are related, or if I need to go through and do the “dpiaware = false” fix I’ve seen elsewhere. Any comments or suggestions on this, or working with ignition Clients in large 4K screens, are appreciated!