# Domino Printer ax350i control from Igniton

**URL:** <https://forum.inductiveautomation.com/t/domino-printer-ax350i-control-from-igniton/88716>\
**Category:** Ignition\
**Created:** [April 11, 2024, 9:50pm UTC](https://forum.inductiveautomation.com/t/domino-printer-ax350i-control-from-igniton/88716 "2024-04-11T21:50:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nick\_McCrate](https://avatars.discourse-cdn.com/v4/letter/n/5f8ce5/32.png) [@Nick\_McCrate](https://forum.inductiveautomation.com/u/Nick_McCrate)\
**Post date:** [April 11, 2024, 9:50pm UTC](https://forum.inductiveautomation.com/t/domino-printer-ax350i-control-from-igniton/88716/1 "2024-04-11T21:50:54Z")

</div>

Does anyone have an example they can share for setting labels on Domino Printers using Codenet commands?  
I setup the printer in Ignition using the TCP protocol on port 7000, with writeback enabled. Ignition created a few tags on its own when I did this(last received time, message, message bytes, writeable, writeable bytes). I'm assuming I put the commands in the writeable tag, and get feedback in the message tag but I tried entering commands in both ASCII and hex format and didn't see any changes on the printer or get any feedback in the message tab.

Any help would be appreciated.

---

<div class="post-metadata">

**Author:** ![pturmel](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/pturmel/32/3295_2.png) [@pturmel](https://forum.inductiveautomation.com/u/pturmel)\
**Post date:** [April 13, 2024, 10:16pm UTC](https://forum.inductiveautomation.com/t/domino-printer-ax350i-control-from-igniton/88716/2 "2024-04-13T22:16:37Z")

</div>

Please continue in the other topic, referenced above.