# Drawing Tools in perspective

**URL:** <https://forum.inductiveautomation.com/t/drawing-tools-in-perspective/51407>\
**Category:** Ignition\
**Created:** [September 28, 2021, 2:53pm UTC](https://forum.inductiveautomation.com/t/drawing-tools-in-perspective/51407 "2021-09-28T14:53:05Z")\
**Posts on this page:** 1\
**Page:** 2

<div class="post-metadata">

**Author:** ![lrose](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/lrose/32/62724_2.png) [@lrose](https://forum.inductiveautomation.com/u/lrose)\
**Post date:** [March 30, 2023, 5:33pm UTC](https://forum.inductiveautomation.com/t/drawing-tools-in-perspective/51407/21 "2023-03-30T17:33:01Z")

</div>

You can.

Check out this post, it is a specific example but it can easily be adapted to imported SVGs.

> [@Perspective, faster page](https://forum.inductiveautomation.com/t/perspective-faster-page/69885/35):
>
> Okay, I had a bit of free time today, so here is a complete SVG solution. You could do the Label as SVG text as well, or a gauge needle if you wanted, I haven't gone that far. Just a little example of the power of using the Ignition Designer to add SVG elements. I didn't include the label for the example. Note: All of this (outside of the calculations needed to find the points for the shape) was done inside of the designer (yes I can be somewhat of a masochist at times. rofl). First a s…

[Previous page](https://forum.inductiveautomation.com/t/drawing-tools-in-perspective/51407.md?page=1)