# Dynagraph cards via Autosol

**URL:** <https://forum.inductiveautomation.com/t/dynagraph-cards-via-autosol/100693>\
**Category:** Ignition\
**Created:** [January 10, 2025, 3:44am UTC](https://forum.inductiveautomation.com/t/dynagraph-cards-via-autosol/100693 "2025-01-10T03:44:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![iboh00](https://avatars.discourse-cdn.com/v4/letter/i/c89c15/32.png) [@iboh00](https://forum.inductiveautomation.com/u/iboh00)\
**Post date:** [January 10, 2025, 3:44am UTC](https://forum.inductiveautomation.com/t/dynagraph-cards-via-autosol/100693/1 "2025-01-10T03:44:01Z")

</div>

Has anyone had luck setting up and pulling in Dynagraph cards via Autosol's 8500 driver? No issues setting up and pulling in the parameters, but when I try to pull the Dynagraph cards through the OPC UA connection, setup similar to other parameters according to Weatherfords 8500 manual, I just get error configuration messages?

---

<div class="post-metadata">

**Author:** ![lclark](https://avatars.discourse-cdn.com/v4/letter/l/96bed5/32.png) [@lclark](https://forum.inductiveautomation.com/u/lclark)\
**Post date:** [June 9, 2026, 4:56pm UTC](https://forum.inductiveautomation.com/t/dynagraph-cards-via-autosol/100693/2 "2026-06-09T16:56:24Z")

</div>

> [@iboh00](#):
>
> ting up and pulling in Dynagraph cards via Autosol's 8500 driver? No issues setting up and pulling in the parameters, but when I try to pull the Dynagraph cards through the OPC UA connection, setup similar to other parameters according to Weatherfords 8500 manual, I just get error configuration message

Hi! yes, try using our help manual to get the information you need to pull the cards: [Weatherford 8500 Card Buffer Upload - ACM User Guide - Confluence](https://autosoln.atlassian.net/wiki/spaces/ACMDOCS/pages/2186149893/Weatherford+8500+Card+Buffer+Upload)