# Dynamically Change Table Customizer Properties?

**URL:** <https://forum.inductiveautomation.com/t/dynamically-change-table-customizer-properties/11979>\
**Category:** Ignition\
**Created:** [July 27, 2016, 2:00pm UTC](https://forum.inductiveautomation.com/t/dynamically-change-table-customizer-properties/11979 "2016-07-27T14:00:51Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![dginther94](https://avatars.discourse-cdn.com/v4/letter/d/f08c70/32.png) [@dginther94](https://forum.inductiveautomation.com/u/dginther94)\
**Post date:** [July 27, 2016, 2:00pm UTC](https://forum.inductiveautomation.com/t/dynamically-change-table-customizer-properties/11979/1 "2016-07-27T14:00:51Z")

</div>

Hello,

I’m wondering if anybody can think of way to dynamically access the table customizer properties of a power table? Specifically, I want to be able to apply the “filterable” property to any column, but the columns aren’t necessarily always going to be the same because the data in the table itself is always changing.

Any support/help/suggestions/ideas are greatly appreciated! Thanks!

---

<div class="post-metadata">

**Author:** ![Amarth](https://sea1.discourse-cdn.com/inductiveautomation/user_avatar/forum.inductiveautomation.com/amarth/32/3313_2.png) [@Amarth](https://forum.inductiveautomation.com/u/Amarth)\
**Post date:** [July 27, 2016, 2:35pm UTC](https://forum.inductiveautomation.com/t/dynamically-change-table-customizer-properties/11979/2 "2016-07-27T14:35:06Z")

</div>

You have access to these customisations in the “Column Attributes Data” property (dataset).  
In the properties tab, it is the last property of the “Appearance” section.